RO Unit

MAKITIS’s RO Unit are the process that is used to remove a wide range of salts, dissolved organics, bacteria, macromolecular organics and particles silt to give water of a high purity. RO Unit must be supplied with softened, de-chlorinated water. A duplex softener is recommended for continuous operation. Utilising softened water for the feed to the RO will reduce the scaling potential on the membrane and therefore lengthen it. Dechlorination of the feed will reduce oxidation damage to the surface of the membrane.

Suggested Inlet Water Conditions

Max. Feed Silt Density Index (SDI)   : 5                     

Free Chlorine Tolerance                      : < 0.1 ppm

Turbidity                                                : < 1 NTU                             

Inlet water Pressure                            : 2 -3 Bar

TDS                                                       : < 1000 ppm       

Iron                                                        : < 0.05 ppm

RO4.jpg
makitis.png

Specification Data

RO UNIT -  RO4" (125LH - 1000LH)

RO UNIT -  FT-RO150 -100PE/200PE

RO UNIT -  FT-RO150F- LLC / HPS

RO UNIT -  MK-RO600 PE/FRP

RO UNIT -  RO4"  (125-500LH)+ Softener

RO UNIT -  RO8"  (1QH) / (1QH+CIP)

RO UNIT -  RO8"  (2QH / 3QH) 

                               (2QH+CIP / 3QH+CIP) 

RO UNIT -  RO8"  (4QH / 6QH /8QH / 12QH) 

RO UNIT -  RO4" (125LH - 1000LH)

ljiok.jpg

RO UNIT -  RO8" (12QH) 

RO8-1Q.01.jpg

RO UNIT -  RO8" (1QH)

RO81Q.jpg

RO UNIT -  RO8" (1QH) + CIP

RO4-844.jpg

RO UNIT -  RO4" (125LH) + Softener

J12.png

RO UNIT -  MK-RO600 PE/FRP

RO8-2Q-0.1.jpg

RO UNIT -  RO8" (2QH)

RO82Q.jpg

RO UNIT -  RO8" (2QH) + CIP

RO4-1054.jpg

RO UNIT -  RO4" (250LH) + Softener

RO150PE.jpg

RO UNIT -  FT-RO150 -100PE/200PE

RO UNIT -  RO8" (3QH)

RO UNIT -  RO8" (3QH) + CIP

RO4-1254.jpg

RO UNIT -  RO4" (500LH) + Softener

RO150G.jpg

RO UNIT - FT- RO150F- LLC / HPS